Images: MODIS images Preparation method: Tsinghua redraw remote sensing evapotranspiration model calculation Spatial scope: Heihe River Basin Time range: data from 2001 to 2014
WANG Zhongjing, ZHENG Hang
The fraction of absorbed photosynthetically active radiation data set of the Heihe River Basin provides the fraction of absorbed photosynthetically active radiation data products from 2013 to 2014. The fraction of absorbed photosynthetically active radiation is the the ratio of photosynthetically active radiation absorbed by the canopy that passes through the canopy and then reflected from the canopy during the passage of the canopy to total photosynthetically active radiation. It is determined by the physiological and ecological characteristics and structural characteristics of vegetation canopy. This data set algorithm is developed on the basis of the energy conservation-based FPAR inversion method, in order to reflect the different path and the absorption probability of direct radiation and scattered radiation in the canopy, a FPAR inversion model is developed, which can distinguish direct radiation from scattering radiation. The algorithm can invert the direct FPAR, scattered FPAR and total FPAR of the canopy of the vegetation. The RMSE obtained from the inversion between the instantaneous FPAR and the observed FPAR is 0.0289, and the R2 is 0.8419.
LI Li, ZHONG Bo, WU Junjun, WU Shanlong, XIN Xiaozhou
"Coupling and Evolution of Hydrological-Ecological-Economic Processes in Heihe River Basin Governance under the Framework of Water Rights" (91125018) Project Data Convergence-MODIS Products-Land Use Data in Northwest China (2000-2010) 1. Data summary: Land Use Data in Northwest China (2000-2010) 2. Data content: Land use data of Shiyanghe River Basin, Heihe River Basin and Shulehe River Basin in Northwest China from 2000 to 2010 obtained by MODIS
WANG Zhongjing
Evapotranspiration monitoring is very important for agricultural water resource management, regional water resource utilization planning and sustainable development of social economy. The limitation of traditional monitoring et method is that it can't be observed in large area at the same time, so it can only be limited to the observation point. Therefore, the cost of personnel and equipment is relatively high. It can't provide the ET data of different land use types and crop types. Remote sensing can be used for quantitative monitoring of ET. the feature of remote sensing information is that it can reflect not only the macro structural characteristics of the earth's surface, but also the micro local differences. This data uses MODIS data and m-sebal model from June to September 2012 and time scale expansion scheme based on reference evaporation ratio to estimate the spatial and temporal distribution of evapotranspiration in the whole growth season of the middle reaches of Heihe River, and uses ground observation data to evaluate m-sebal model and time scale expansion scheme in detail. Its time resolution is day by day, spatial resolution is 250m, and data coverage is in the middle reaches of Heihe River, unit: mm. The projection information of the data is as follows: UTM projection, 47N.
ZHOU Yanzhao, ZHOU Jian
The research project on land surface data assimilation system in western China belongs to the major research plan of "environmental and ecological science in western China" of the national natural science foundation. the person in charge is researcher Li Xin of the institute of environment and engineering in cold and arid regions of the Chinese academy of sciences. the project runs from January 2003 to December 2005. The output data set of the Land Surface Assimilation System in Western China is one of the data achievements of the project. It is a Chinese Land Surface Data Assimilation System constructed by Dr. Huang Chun Lin and researcher Li Xin of the Institute of Cold and Arid Region Environment and Engineering, Chinese Academy of Sciences. CoLM model is used as a model operator to couple microwave radiation transmission models for different surface states such as soil (including melting and freezing), snow cover, etc. and to assimilate passive microwave observations (SSM/I and AMSR-E), so that the system can finally output assimilation data of soil moisture, soil temperature, snow cover, frozen soil, sensible heat, latent heat, evaporation, etc. with higher accuracy. Data format and naming: It is stored in a monthly folder and contains 24 hours of data every day. The naming rules are as follows: YYYMMDDHH.grid, where YY is the year (2002), MM is the month, DD is the day, HH is the hour,. grid and. flux are file extensions, the former is the state variable output result and the latter is the flux output result. The file format is a binary FLOAT value, that is, every 4 bytes represents a value.
LI Xin, HUANG Chunlin
This data is 2002.07.04-2010.12.31 MODIS daily cloudless snow products in the Tibetan Plateau. Due to the snow and cloud reflection characteristics, the use of optical remote sensing to monitor snow is severely disturbed by the weather. This product is based on the most commonly used cloud removal algorithm, using the MODIS daily snow product and passive microwave data AMSR-E snow water equivalent product, and the daily cloudless snow product in the Tibetan Plateau is developed. The accuracy is relatively high. This product has important value for real-time monitoring of snow cover dynamic changes on the Tibetan Plateau. Projection method: Albers Conical Equal Area Datum: D_Krasovsky_1940 Spatial resolution: 500 m Data format: tif Naming rules: maYYMMDD.tif, where ma represents the data name; YY represents the year (01 represents 2001, 02 represents 2002 ...); MM represents the month (01 represents January, 02 represents February ...); DD represents the day (01 Means 1st, 02 means 2nd ...).
HUANG Xiaodong
This dataset includes passive microwave remote sensing brightness temperatures data for longitude and latitude projections and 0.25 degree resolution from 2002 to 2008 in China. 1. Data processing process: NSIDC produces AMSR-E gridded brightness temperature data by interpolating AMSR-E data (6.9 GHz, 10.7 GHz, 18.7 GHz, 23.8 GHz, 36.5 GHz, and 89.0 GHz) to the output grids from swath space using an Inverse Distance Squared (ID2) method. 2. Data format: Brightness temperature files: two-byte unsigned integers, little-endian byte order Time files: two-byte signed integers, little-endian byte order 3. Data naming: ID2rx-AMSRE-aayyyydddp.vnn.ccc (China-ID2r1-AMSRE-D.252002170A.v03.06V) ID2 Inverse Distance Squared r1 Resolution 1 swath input data AMSRE Identifies this an AMSR-E file D.25 Identifies this as a quarter degree file yyyy Four-digit year ddd Three-digit day of year p Pass direction (A = ascending, D = descending) vnn Gridded data version number (for example, v01, v02, v03) ccc AMSR-E channel indicator: numeric frequency (06, 10, 18, 23, 36, or 89) followed by polarization (H or V) 4. Cutting range: Corner Coordinates: Upper Left (60.0000000, 55.0000000) (60d 0'0.00 "E, 55d 0'0.00" N) Lower Left (60.0000000, 15.0000000) (60d 0'0.00 "E, 15d 0'0.00" N) Upper Right (140.0000000, 55.0000000) (140d 0'0.00 "E, 55d 0'0.00" N) Lower Right (140.0000000, 15.0000000) (140d 0'0.00 "E, 15d 0'0.00" N) Center (100.0000000, 35.0000000) (100d 0'0.00 "E, 35d 0'0.00" N) Origin = (60.000000000000000, 55.000000000000000) 5. Data projection: GEOGCS ["WGS 84", DATUM ["WGS_1984", SPHEROID ["WGS 84", 6378137,298.257223563, AUTHORITY ["EPSG", "7030"]], TOWGS84 [0,0,0,0,0,0,0], AUTHORITY ["EPSG", "6326"]], PRIMEM ["Greenwich", 0, AUTHORITY ["EPSG", "8901"]], UNIT ["degree", 0.0174532925199433, AUTHORITY ["EPSG", "9108"]], AUTHORITY ["EPSG", "4326"]]
Mary Jo Brodzik, Matthew Savoie, Richard Armstrong, Ken Knowles
Contact Support
Northwest Institute of Eco-Environment and Resources, CAS
0931-4967287
poles@itpcas.ac.cn
Links
National Tibetan Plateau Data CenterFollow Us
A Big Earth Data Platform for Three Poles © 2018-2020 No.05000491 | All Rights Reserved
｜ 
No.11010502040845
Tech Support: westdc.cn
